Filter
Top Products
P-660H-Tx v2 Support Notes
Step 3: You can modify the rule by clicking the button ‘Edit’ on the rule:
Key Settings:
RuleName
Give this rule a name, for example, 'WWW'
BW Budget
Configure the bandwidth you would like to allocate to this rule
Priority
Enter a number between 0 and 7 to set the priority of this class. The
higher the number, the higher the priority. The default setting is 3.
Use All
Managed
Bandwidth
Check this box if you would like to let this class to borrow bandwidth from
it's parents when the required bandwidth is higher than the configured
amount. Do not check this if you want to limit the bandwidth of this class
at the configured value.(Please note that you should also disable
Maximize Bandwidth Usage on the interface to meet the condition.)
Service
Select User-defined, SIP, FTP, or H.323 to specify the traffic types
Destination
IP Address
Enter the IP address of destination that meets this class.
69
All contents copyright © 2006 ZyXEL Communications Corporation.