KM0832 User Manual
74
Preparing to Upgrade the Firmware
To prepare to upgrade the firmware:
Notify all users to logout of the OSD and the KM0832 Administrator
Utility.
Ensure that all computers are powered on; otherwise, some KVM adapter
cables may not be upgraded. (Disregard this if you are using the Firmware
Upgrade Utility to upgrade the firmware.)
Upgrading Firmware via the KM0832 Administrator Utility
To upgrade the firmware for all possible devices in the KVM installation:
1. From the computer that was used to download the firmware upgrade
package, open a Web browser and login to the KM0832 Administrator
Utility (see Logging In, page 34).
2. Click the Upgrade icon. The following dialog box appears:
3. Click OK to enter Firmware Upgrade mode. This may take a few minutes
while the system prepares to upgrade the firmware. Users with active
sessions in the OSD will be informed that they should logout. (Some
KVM consoles may be automatically logged out.)
After a few minutes, the Firmware Upgrade Webpage appears. It
displays the current firmware version(s) of the KM0832 and other
module(s).
