PN9108 User Manual
22
(Continued from previous page.)
Dynamic IP Address:
To have the Station obtain its IP address automatically from a DHCP server,
select the
DHCP
radio button. When you do, the fields in the Network
Settings section are disabled, and a
Mail Configuration
panel appears:
1. Key in the domain name or IP address of the SMTP mail server for
your network in the top field.
2. If your server requires authentication, check the SMTP server requires
authentication checkbox and key in your account name and password
in the fields provided.
3. Key in the address of your email account in the Email From field.
4. Key in the email addresses of the users you want to receive the IP
address in the bottom field. This field can only accept 128 total
characters. Addresses can be comma, semicolon, or spacebar delimited.
5. When you are all done, click Save and Restart to close the dialog box
and reset the PN9108.
Note: Be sure that the DNS setting is filled in with a value appropriate to the
network you are on.
pn9108.book Page 22 Friday, December 14, 2007 4:38 PM
