A SERVICE OF

logo

Chapter 6. Out of Band Operation
61
Finishing Up
This step is the same as for a direct dial in connection. See page 58 for details.
Logging In
1. In the Out of Band Configuration dialog box (see page 45), make sure that
the Enable dial-out function setting is disabled (the box is unchecked), and
that the PN9108's baud rate is set to 115200.
2. Double click the icon you created in the Dial-up Network folder.
3. Key in your Username and Password; click Connect and wait for the
Authentication procedure to complete (be patient, it may take a few
moments).
4. Use your browser or Telnet to access the PN9108 the same way as if you
were accessing it over the net.
pn9108.book Page 61 Friday, December 14, 2007 4:38 PM