Chapter 4. Administration
23
Service Ports:
The values shown in the dialog box are the default settings. If you change them,
users must specify the port as part of the URL when logging in. If you change
the http port to 81, for example, users must log in as follows:
http://10.0.100.65:81
IP Installer Settings:
To help determine and/or set an IP address for a PN9108 an IP Installer utility
has been included on the PN9108 software CD. (See Method 1:, page 71 for
operation details.) The meanings of the settings are described in the following
table:
Enabled Users can see the current IP address for the PN9108, and
can change its settings with the utility.
View Only Users can see the current IP address for the PN9108, but
cannot change its settings with the utility.
Disabled The PN9108 does not show up in the IP Installer’s list of
devices. It cannot be seen, and cannot be changed.
pn9108.book Page 23 Friday, December 14, 2007 4:38 PM
