Chapter 3. Local Operation
27
Save / Load Profile
The VM1616T allows you to store up to 32 (numbered 0–31) connection
profiles that can be configured and recalled later. The stored profiles can be
viewed using the browser GUI. See Profile, page 40 for more information.
To use the unit’s front panel pushbuttons to save/recall profiles, do the
following:
1. Use the Menu button to access the Save / Load Profile page.
2. With the cursor flashing at Save / Load Profiles press In/Out/Enter to go to
the Profiles page where you can save or load connection configurations.
Use the Out dial and turn it clockwise/counterclockwise to select Save to a
Profile No. or Call a saved Profile No. from the submenu.
3. To save the current connection configuration, bring the cursor to Save to a
Profile No. submenu. Use the In dial and turn it clockwise (ascending from
0, 1, 2 .... 31) or counterclockwise (descending from 0, 31, 30.... 1) to
select and assign a profile to this number. Press In/Out/Enter to save.
4. To load a Saved Profile, bring the cursor to Call a saved Profile No.
submenu. Use the In dial and turn it clockwise (ascending from 0, 1, 2 ....
31) or counterclockwise (descending from 0, 31, 30.... 1) to select the
profile you want to load. Press In/Out/Enter to save.
Note: The default profile number for the Save / Load Profile page is 0.
Save / Load Profile
Security Mode
Save a Profile No. 0
Call a Saved Profile No. 0
