A SERVICE OF

logo

Open as PDF
next previous
Chapter 3. Local Operation
29
Switch Audio Only
The Switch Audio Only page lets you switch HDMI signals to one input port.
1. Use the Out dial and turn it clockwise (right) or counterclockwise (left) to
select an input port.
2. When the cursor is on your selected input port, use the In dial and turn it
clockwise (ascending from 1, 2 .... 16, NA) or counterclockwise
(descending from 1, NA, 16 .... 2) to cycle through the available input
sources.
Options are Ports 1–16 and NA (none).
3. Press In/Out/Enter to confirm your selection. The HDMI signals from the
selected input port are now tied to the selected output port.
4. Repeat steps 1–3 for all required ports.
Note: If you did not make any changes, press ESC pushbutton to return to
the Main Screen.
OUTPUT A 01 02 03 04 05 06 07 08
INPUT A 02 02 05 05 01 01 03 04