VM1616T User Manual
48
Switch Port Commands
The formulas for Switch Port commands are as follows:
1. Switch Command + Input Command + Port number + Output Command +
Port Number + Address + Device Number + Control + [Enter]
For example, to switch input port 02 (audio and video) to output port 05 on
device 01, type the following:
sw i02 o05 a01 [Enter]
2. Switch Command + Output Command + Port Number + Address + Device
Number + Control + [Enter]
For example, to turn off video output on port 03, type the following:
sw O03 a00 video off [Enter]
3. Switch Command + Output Command + Port Number + Address + Device
Number + Control + [Enter]
For example, to switch the next output to the local port, type the following:
sw l1 + a00 [Enter]
Possible Values
The following table shows the possible values for switch commands:
Command Description
sw Switch command
Input Command Description
i Input command
Input Port Number Description
xx 01-16 port (default is 01)
Output Command Description
o Output command
Output Port Number Description
yy 01-16 port (default is 01)
l1 Local output port
* All output ports
