646 QoS Commands
console#show interfaces cos-queue gigabitethernet 1/0/1
Interface...................................... 1/0/1
Interface Shaping Rate......................... 0
Queue Id Min. Bandwidth Scheduler Type Queue
Management Type
-------- -------------- -------------- --------------
0 0 Weighted Tail Drop
1 0 Weighted Tail Drop
2 0 Weighted Tail Drop
3 0 Weighted Tail Drop
4 0 Weighted Tail Drop
5 0 Weighted Tail Drop
6 0 Weighted Tail Drop
The following table lists the parameters in the examples and gives a
description of each.
Parameter Description
Interface The port of the interface. If displaying the global
configuration, this output line is replaced with a
global configuration indication.
Intf Shaping Rate The maximum transmission bandwidth limit for
the interface as a whole. It is independent of any
per-queue maximum bandwidth values in effect
for the interface. This value is a configured value.
Queue Mgmt Type The queue depth management technique used for
all queues on this interface.
Queue An interface supports
n
queues numbered 0 to
(
n
-1).The specific
n
value is platform-dependent.
Internal egress queue of the interface; queues 0–6
are available.
2CSPC4.XModular-SWUM200.book Page 646 Thursday, March 10, 2011 11:18 AM
