36
Two Year Limited New Product Warranty
Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal
use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service
center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity
to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric
motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible
for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone
other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential
damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect
to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly
disclaimed by Delta.
WARRANTY
To register your tool for warranty service visit our website at www.deltamachinery.com.
REPLACEMENT PARTS
When servicing use only identical replacement parts. Check
the parts list included for more information. Parts lists can
also be found online at www.deltamachinery.com.
SERVICE AND REPAIRS
All quality tools will eventually require servicing, or
replacement of parts due to wear from normal use. For
A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers,
and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the
name of your nearest supplier.
SINCE ACCESSORIES OTHER THAN THOSE OFFERED BY DELTA HAVE NOT BEEN TESTED
WITH THIS PRODUCT, USE OF SUCH ACCESSORIES COULD BE HAZARDOUS. FOR SAFEST
OPERATION, ONLY DELTA RECOMMENDED ACCESSORIES SHOULD BE USED WITH THIS
PRODUCT.
MODEL DESCRIPTION
34-254 6" Dado table insert
34-264 7" and 8" Dado table insert
34-453 Moulding cutterhead table insert
36-U30 30” Capacity Unifence
36-B30 30” Capacity Biesemeyer Commercial Fence
36-T30 30” Capacity T
2
Fence
78-850 Extension Table
ACCESSORIES
SERVICE
assistance with your tool, visit our website at www.
deltamachinery.com for a list of service centers or call the
Customer Care Department at 1-800-223-7278. All repairs
made by our service centers are fully guaranteed against
defective material and workmanship. We cannot guarantee
repairs made or attempted by others. Should you have any
questions about your tool, feel free to write us at any time.
In any communications, please give all information shown
on the nameplate of your tool (model number, type, serial
number, etc.).
