A SERVICE OF

logo

Chapter 2Operation 2-30
Attaching a Serial Mouse
The serial port features a 9-pin connector. You can connect any serial device such as
a mouse to this port.
To connect a serial mouse, follow these steps:
1. Turn the system power off.
2. Connect the cable to the serial port on the rear panel of the DeskNote
Computer.
3. Tighten the screws to fasten the cable to the serial port.
4. Turn on the DeskNote Computer.
In addition, you may need to install the manufacturer-supplied driver for the serial
mouse. Refer to the device’s user’s guide for more information.
Figure 2-23