A SERVICE OF

logo

Chapter 2Operation 2-34
Attaching a TV Set
The S-video jack on the rear panel of the DeskNote is used for transmitting video
signals to a TV set. You may need to select the video standard for video display.
Enter the System Configuration Utility (SCU), Components Menu to specify the
appropriate TV mode. Simultaneous display on external monitor (CRT) and TV is
available. You may enter the SCU to select the appropriate parameters or use the Fn
+ F6 keys (refer to Chapter 2, Using Hot Keys) to change the setting.
See figure 2-28 for information on attaching a TV set.
Note: Different countries use different TV broadcast standards. A TV set must
comply with the appropriate standard to properly receive broadcast signals.
You should refer to your TV user guide to make sure which TV standard you
are using.
Figure 2-28