157157157157
www.lincolnelectric.com
Recommended General Options
Power Sources
POWER SOURCE OPTIONS
Advanced Control Panel
Provides 2/4-step trigger with
adjustable Pulser controls and
Downslope timer for TIG
welding. Also includes
adjustable Hot Start
™
and
Arc Force
™
internal panel
controls for stick welding,
and other user selectable
features.
Order K2621-1 for
Precision TIG
®
275
Advanced Process Panel
Includes Pulsed MIG,
Pulse-On-Pulse
™
and Power
Mode
™
capabilities. Alpha-
numeric display for accurate
setting.
Order K1763-1 for V350-PRO
Factory Model, V450-PRO
Air Filter Kit
Mounts on the front of the
machine and uses cleanable,
all metal air filters. Not com-
patible with dual process
switch.
Order K1486-1 for CV-655
and DC-655
Digital Meter Kit
Accurately displays welding
amps and volts.
Order K1482-1 for CV-655
and DC-655
Dual Process Switch
Mounts on front of machine
and provides polarity change
or electrical isolation. Great
for arc gouging applications
and where two separate
feeders require different out-
put polarity or inductance set-
tings. Not compatible with air
filter kit.
Order K1528-1 for CV-655
and DC-655
Multi-Process Switch
3-position switch allows
quick and easy change from
electrode positive or negative
semiautomatic/automatic
wire feed welding to stick or
air carbon arc gouging.
Order K804-1 for DC-400,
DC-600
Paralleling Kit
Permits paralleling of two
power sources.
Order K1611-1 for DC-600
and DC-655
Order K1897-1 for DC-1000
Order K1900-1 for DC-1500
Power Factor Capacitor
Kit
Used to reduce current draw
and keep electricity costs to a
minimum when machine is
routinely operated at high
outputs. Reduces input amps
by approximately 20% at
rated load.
Order K1894-1 for Idealarc
250 (60 Hz models only)
Power Factor Capacitor
Kit
Used to reduce current draw
and keep electricity costs to
a minimum when machine
is routinely operated at high
outputs.
Order K1831-1 for
Precision TIG
®
275
42 Volt Transformer Kit
Provides a way to use the
LF-72, LF-74, LN
™
-742, LN
™
-10,
DH-10 and Cobramatic
®
wire
feeder on a DC-1000 that has
115V AC available on the
terminal strip.
Order K1520-1 for DC-1000
DeviceNet
™
Interface
Module
This module provides net-
working capabilities for
Output Control, Weld
Settings, Weld Mode
Selection and Data Logging.
Order K2206-1
for Power Wave
®
455M,
Power Wave
®
455M/STT
®
Ethernet/DeviceNet
™
Interface Module
This module provides all
DeviceNet functionality, net-
working capabilities for Weld
Development, Data Logging,
Systems Updates,
Diagnostics, Weld Settings
and Weld Mode Selection.
Order K2207-2
for Power Wave
®
455M,
Power Wave
®
455M/STT
®
157
