Idealarc
®
DC-655
This 650-amp, 100% duty cycle CV/CC power source is ideal for construction and shop fabrication
because of its excellent arc performance and many energy saving features.
Energy Efficient Multi-Process Welder
Idealarc
®
DC-1000
Designed for semiautomatic and automatic welding, the precise control of the DC-1000 delivers
superior high amperage MIG, flux-cored, submerged arc welding and air carbon arc gouging
with up to 5/8" (15.9 mm) diameter carbons.
Multi-Process Welder
Processes
• MIG
• Flux-Cored
• Submerged Arc
• Gouging
Output Input
Key Options
• K1897-1 Paralleling Kit
• K857 Remote Output Control
• K843 Amptrol
®
Adapter Kit
• K1798 Terminal Strip Adapter
Cable
•
More options at end of section
Literature
E5.50
Processes
•Stick
•TIG
• MIG
• Flux-Cored
• Submerged Arc
• Gouging
Output Input
Key Options
• K1482-1 Digital Meter Kit
• K1528-1 Dual Process Switch
• K1611-1 Paralleling Kit
• K842 Undercarriage
•
More options at end of section
Literature
E5.46
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range inches (mm) lbs.(kg)
Idealarc
®
K1609-2 230/460/575/3/60 650A/44V/100% 122/61/49A 13-44V 27.5 x 22.2 x 38 720
DC-655 K1610-1 230/400/3/50/60 (815A/44V/60%) 122/70A 50-815A Max. (699 x 564 x 965) (327)
OCV: 46V (CV)
68V (CC)
DC
3
PHASE
60
Hz
50
Hz
CV
CC
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current/Voltage/Duty Cycle Rated Output Output Range inches (mm) lbs.(kg)
Idealarc
®
K1386-3 230/460/3/60 100A/44V/100% 193/96.5A 16-46V 30.7 x 22.5 x 39 821
DC-1000 K1387-3 220/380/440/3/50/60 193/112/96.5A 150-1300A (781 x 572 x 991) (372)
(CE Model)
K1387-6 415/3/50/60 102A
DC
3
PHASE
60
Hz
50
Hz
CV
CC
• CC Arc Force Control Knob with built-in “Hot Start”.
• “Idle Shut Down mode” automatically shuts machine off
when not in use to minimize power consumption.
• Fan-As-Needed
™
—solid state thermally controlled cooling
fan operates only when required. Minimizes power
consumption, operating noise and dust intake.
• Separate output studs let you choose low or high inductance.
• Panel switches are behind front latched panel, for remote
or machine panel output control, and output “on” or remote
“on” selection, and CC, CV Subarc or CV MIG mode selection.
• Low profile case allows stacking machines up to three high
to conserve floor space.
• Electronic and thermal protection from current overload
and excessive temperatures.
• Three-year warranty on parts and labor.
• Seven-year warranty on power rectifier.
• 500 amp output connections provide enhanced arc characteristics
for low amperage submerged arc and MIG welding procedures.
• Single range control for precise output control and easy operation.
• Terminal strip and output studs for remote connections and cable.
• Low profile case allows installation of the DC-1000 under a work-
bench and for stacking up to 2 machines to conserve floor space.
• Removable side panels for easy access to internal parts.
• Line voltage compensation maintains weld consistency, even with
line voltage changes of ±10%.
• Electronic and thermostatic protection from current overload and
excessive temperatures.
• Internal components, including windings, rectifiers and circuit
boards, are coated to protect against the effects of moisture and
corrosion.
• Recessed front panel protects operating controls.
• Three-year warranty on parts and labor.
• Seven-year warranty on power rectifier.
www.lincolnelectric.com/multi-process-welders
Multi-Process Welders
32
