A SERVICE OF

logo

Open as PDF
next previous
Setting
60
Select Normal or Enhanced according to the output signal
of video equipment. Press the Point
▲▼
buttons to switch
between each option.
Normal ........ When the output of video equipment is set
to “STANDARD.”
Enhanced .... When the output of video equipment is set
to “ENHANCED.”
HDMI setup
Note:
 •Thenamesfortheoutputsettingof
videoequipmentvaryfromequipment
toequipment.Fordetails,refertothe
manualofvideoequipment.
Advanced color matching
Measured Information
.... When selecting Measured
Information, the window shown
right appears. Current image level is
shown. To go back to the Advanced
color matting window, press any key.
Advanced color matching
.... Press the POINT
▲▼
buttons to
switch between On and Off. Selecting
On displays the values which link to
the Color Match values.
Measured .............. Displays the measured values of Red,
Green, and Blue.
Target .................... Adjusts the chromatic coordinate
(X,Y) and the gain value (g) of Red,
Green, Blue, Cyan, Magenta, Yellow,
and White. Use the Point
▲▼
buttons to move the red frame pointer
to an item of which you want to adjust
the value and then press the SELECT
button. Use the Point
▲▼
buttons
to adjust the value. To move to the
next digit, use the Point
▲▼
buttons.
Press the SELECT button to set the
value.
Auto test pattern
.... Select On to display a suitable pattern
when setting items.
Menu off ................. Close the menu temporarily.
Factory default ...... Select Factory default and press
the SELECT button. Then Return to
factory default of Color matching?
message appears. To reset the
selected Measured value and
Target value, select Yes. Then, the
confirmation box appears. Press the
SELECT button at Yes again.
Reset ...................... Select Reset and press the SELECT
button. Then the confirmation
message appears. Press the
SELECT button at Yes. to reset to the
previously stored values.
Store ...................... Select Store and press the SELECT
button. Then the Confirmation box
appears. To store adjusted data,
select Yes.
Test pattern ........... Displays the Test pattern menu.
Back ....................... Cancels the Advanced color
matching menu display.
Measured information
Advanced color matching
Test pattern