2
Getting Set Up
2-14
Phaser 300X Color Printer
When you turn on the printer, the
POWER and ERROR indicators on the
front panel light up. The printer takes about 15 to 20 minutes to warm up
and complete a series of self-tests. During the warm-up cycle, the
POWER
indicator remains on; the
ERROR light goes out.
After the self-tests run successfully, the printer prints a startup page. The
startup page prints whenever you turn on or reset the printer. If you want to
turn off the startup page, you can use a utility file provided on the
Phaser 300X CD-ROM and diskettes. Refer to “Turning off the startup page”
on page A-1 and the Phaser 300X Drivers and Utilities Printing Reference for
details on using the utility file.
Note
You should leave the printer on if you use it frequently (such as
during a normal work week with daily use). The printer has an
automatic standby mode that keeps the printer ready to use and
reduces energy consumption. If the printer will be idle for two
days or more (such as over a weekend), turn it off.
