Specifying input parameters
2-4 Using LCDS Print Description Language
In the event of a power failure, the system notifies you if you
need to retransmit any data, and which records to resend.
Downloading
resource files from
the host to the
printer
You can download resource files such as forms, fonts, JSLs, and
so forth, by using the FILE DJDE.
The FILE dynamic job descriptor entry (DJDE) transfers files
while normal printing activity is taking place. However, you may
need to precondition the file that you want to transfer, by adding
a delimiter at the end of each record to prevent truncation of
trailing blanks by the host spooler. The FILE DJDE loads card
image files from the data stream to the printing system disk while
a printing job is in progress. (Refer to the “Offline specifications”
appendix in this guide for information on the format of LPS
labeled tapes.)
The FILE DJDE is record oriented and is applied immediately. It
can be included with other record oriented or page oriented
DJDEs in a DJDE packet. (Refer to “FILE DJDE processing” for
further information on using the FILE DJDE.)
