Xerox 721P83071 Manual

A SERVICE OF

next previous

4635 LPS OVERVIEW

4635 LPS specifications

Listed below are specifications for the 4635. For more

information on 4635 installation planning and specifications, refer

to the Xerox 4635 LPS Installation Planning Guide.

Equipment dimensions

Hardware Width Depth Height Weight

System controller

—with optional

peripheral

cabinet (fully loaded)

24 in./610 mm

48 in./1219 mm

28 in./712 mm

28 in./712 mm

38.2 in./970 mm

38.2 in./970 mm

300 lbs./136 kg

616 lbs./280 kg

Printer

—with monitor and two

feeder/stacker

modules

—with monitor, two

feeder/stacker

modules, and

optional bypass

transport

—with monitor and

three feeder/

stacker modules

(one optional)

—with monitor and

four feeder/ stacker

modules (two

optional)

151.2 in./3842 mm

170.2 in./4324 mm

183.5 in./4661 mm

215.8 in./5480 mm

35.9 in./711 mm

35.9 in./711 mm

35.9 in./711 mm

35.9 in./711 mm

59.6 in./1513 mm

59.75 in./1518 mm

59.6 in./1513 mm

59.6 in./1513 mm

2588 lbs./1174.9 kg

2768 lbs./1255.6 kg

3109 lbs./1411.9 kg

3630 lbs./1648.9 kg

Clearance requirements

Printer Requires 36 inch/914 mm clearance on each side. 50 inches/1270

mm required at front of printer.

System controller Requires 36 inch/914 mm clearance on each side.

Finishers and bulk feeders Finishers and bulk feeders attached to your bypass transport

require 36 inch/914 mm clearance on each side.

Environmental requirements

Operating temperature 74° F ± 4° F/24° C ± 4° C (recommended)

54° - 85° F/14° - 29° C (min-max)

Humidity 45% ± 10% (recommended)

15-85% (min-max)

1-6 XEROX 4635 LASER PRINTING SYSTEM PRODUCT REFERENCE