Filter
Top Products
13-EN
About media that can be played
The following table shows which discs can be played on which models.
Playback
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press SOURCE to switch to the
DISC mode.
2
While playing back MP3/WMA/AAC, press 1 or 2 to
select the desired folder.
Pressing and holding 1 or 2 will change folders continuously.
3
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing again will resume playback.
5
To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
•The “” indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs can not be used.
• The track number displayed for Mp3/WMA/AAC playback is its
corresponding file number recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• During CD/MP3/WMA/AAC playback, press to return to the last
selected search mode.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
Repeat Play
1
Press a4.
The song is played back repeatedly.
a
*1
a
*2
(off) a
*1 Only a track/file is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3/WMA/
AAC mode only)
2
To cancel repeat play, select (off) with the above
procedure.
M.I.X. (Random Play)
1
Press 5s.
The songs are played back in random sequence.
s
*1
g
*2/*3
(off) s
*1 Only files in a folder are played back in random sequence.
(MP3/WMA/AAC mode)
*2 The tracks/files in the disc are played back in random sequence.
(CD or MP3/WMA/AAC mode)
*3 In the USB mode, all files stored in the Flash Memory are played
back in random sequence.
2
To cancel M.I.X. play, select (off) with the above procedure.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press ENTER during play.
This will set the search mode, and the “” indicator lights up.
2
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
•Press in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
CD/MP3/WMA/AAC
CD CD-TEXT MP3 WMA AAC
CDE-HD137BT
CDE-HD138BT
SOURCE/
Rotary encoder/ /ENTER
1
2
4 5