Filter
Top Products
36-EN
Flash Memory Connection (optional)
1
Open the cover of the USB Port.
2
Connect the Flash Memory directly to the USB Port, or via
the USB cable.
1
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2
Close the cover of the USB Port.
Notes
• Change to a source other than the Flash Memory mode, and then
remove the Flash Memory Device. If Flash Memory is removed while its
contents are playing, data may be damaged.
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then reconnect.
• After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.
About MP3/WMA/AAC File of Flash Memory
Playing back MP3/WMA/AAC
MP3 files are prepared, and then stored to a Flash Memory Device. This
unit can recognize at most 100 folders and 100 files per folder stored in
Flash Memory. Playback may not be performed if a Flash Memory
Device exceeds the limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
Only MP3/WMA/AAC files are supported. Other media types are
ignored.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory formats.
Connecting an iPod/iPhone
An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod). When an iPod/iPhone is connected
to this unit, you can choose to control the iPod/iPhone using its own
controls or by the head unit controls. For details, refer to “Setting the
iPod Control” on page 37.
Notes
• An iPhone connected to this unit operates as an iPod. The iPhone can
be used as a hands-free device using the integrated Bluetooth module.
• Internet and telephone functions of iPod touch or iPhone, etc., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs, at this time do not operate the unit
to avoid a malfunction.
About iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.4.3
iPod nano (6th generation): Ver.1.0.0
iPod touch (3rd generation): Ver.4.3
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3
iPod classic (80 GB, 160 GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
Connect Flash Memory
Remove Flash Memory
USB Connection TerminalThis unit
Flash Memory
(sold separately)
or
Flash Memory
(sold separately)
Cable (sold
separately)
iPod/iPhone (optional)
Rotary encoder/ /ENTER
SOURCE/
Preset buttons
(1 through 6)
1
2
4 5
ABC SKIP
USB Connection Terminal
This unit
iPod/iPhone
(sold separately)
Included with iPod/iPhone