Filter
Top Products
11-EN
Displaying the Title/Text
It is possible to display the CD title if the title has
been previously inputted. For details, see
“
Titling
Discs
”
(page 12). Text information, such as the disc
name and the track name, will be displayed if
playing a CD text compatible disc. It is also
possible to display the folder name, the file name,
and the ID3 tag, etc. while playing MP3 files.
1 Press the TITLE button.
The mode will change every time the button is
pressed.
About “Title” and “Text”
Title: With this device, it is possible to input the CD
name (refer to page 12). This inputted name
is referred to as a “title.”
Text: Text compatible CDs contain text information
such as the disc name and track name. Such
text information is referred to as “text.”
CD/Changer mode:
MP3 mode:
∗1
Displayed during playback of a disc with CD
Text. “NO TEXT” will be displayed when the
CD contains no text data.
∗2
If an MP3 file contains ID3 tag information, all
the ID3 tag information is displayed (e.g.,
track name, artist name, and album name).
No other information is displayed.
"NO TAG" will be displayed when an MP3 file
contains no ID3 tag information.
∗3
The recording sampling rate and bit rate of
the MP3 file are displayed.
NOTES
• Some characters may not be displayed correctly with
this device, depending on the character type.
• The CD changer must also be CD Text compatible for
the Text information to be displayed.
• When the Scroll Setting (refer to page 8) is set to
“SCROLL MANU”, press and hold the TITLE button
for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME
DISPLAY, FILE NAME DISPLAY or ID3 TAG
DISPLAY mode).
• “No Support” is displayed when the desired text
information cannot be displayed on this unit.
• If the title was not previously input, “------------” is
displayed.
Searching for Titled Discs
If a CD is titled, you can do a search for it. (To title
CDs, refer to “Titling Discs” on page 12.)
1 When the unit is in CD Changer mode, press
and hold the T.S.M. button for at least 2 seconds.
The title blinks in the display.
2 Press the g DN or f UP button to select
the desired disc title from the CD changer.
3 Press the T.S.M. button to play the selected disc.
The unit will automatically search for the disc
and begin play.
NOTE
This function cannot be performed when using a multi-
changer switching device.
ELAPSED TIME DISPLAY
↓
↓
↓
↓
↓
↓
FOLDER NAME DISPLAY
FILE NAME DISPLAY
ID3 TAG DISPLAY
∗2
FRAME DISPLAY
∗3
TITLE DISPLAY
ELAPSED TIME DISPLAY
↓
↓
↓
↓
TEXT DISPLAY (DISC NAME)
∗1
TEXT DISPLAY (TRACK NAME)
∗1
TITLE DISPLAY