Alpine CDA-7878R Car Stereo System User Manual


 
27-EN
Supported playback sampling rates and bit
rates
Sampling rates: 8 kHz - 44.1 kHz, bit rates: 8 -
320 kbps
Note that for sampling rates such as 11,025 kHz,
this device's frame display (Page 11) may not
display correctly.
ID3 tags
This device supports ID3 tag v1.
If ID3 tag data is in an MP3 file, this device can
display the title (track title), artist name, and album
name ID3 tag data.
This device can only display single-byte
alphanumeric characters and the underscore. For
non-supported characters, "No Support" is
displayed.
This device can only display up to 64 characters for
each data item.
Producing MP3 discs
MP3 files are prepared, then written to a CD-R or
CD-RW using CD-R writing software. Each disc
can hold up to 255 files/folders (including Root
Folders).
Media supported
The media that this device can play back are CD-
ROMs, CD-Rs, and CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660
Level 1 or Level 2.
Under the ISO9660 standard,
there are some restrictions to remember.
The maximum nested folder depth is 8 (including
the root directory). File/folder names are limited
to 31 characters (including the extension).
Valid characters for folder/file names are letters A-
Z (all caps), numbers 0-9, and '_' (underscore).
This device also can playback discs in Joliet,
RockRidge, Apple ISO, and other standards that
conform to ISO9660. However, sometimes the file
names, folder names, etc. are not displayed
correctly.
Formats supported
This device supports CD-ROM XA, Mixed Mode
CD, Enhanced CD (CD-Extra) and Multi-Session.
This device can not correctly play back discs
recorded with Track At Once or packet writing.
Order of tracks
Track playback is based on the pathname order
used for the files when they were written to the CD.
When CD audio and MP3 files are both present
on a disk, playback starts from Folder No. 2.
Also, the track display for CD audio data playback
is the track numbers recorded on the disc.
Terminology
Bit rate
This is the "sound" compression rate specified
for encoding. The higher the bit rate, the higher
the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second
the data is sampled (recorded). For example,
music CDs use a sampling rate of 44.1 kHz, so
the sound level is sampled (recorded) 44,100
times per second. The higher the sampling rate,
the higher the sound quality, but also the larger
the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and
other sound files into the specified audio
compression format.
ID3 tag
Song information such as track titles, artist
names, album names, etc., written into MP3 files.