Filter
Top Products
15-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from General Customizing, External
Device, to select your desired setting.
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
1
Press and hold F/SETUP for at least 3 seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
(e.g. Select SUBW (Subwoofer))
SUBW → CD-DA / CD/MP3*
1
→ SCR → MUTE → INT→ AUX
→ (AUX name)*
2
→ PWR → TEL*
3
→ CH NO/ALPHABET →
ADF → SUBW
*
1
CD-DA/CD/MP3 is displayed when an MP3 compatible CD
changer is connected. Refer to “Playing MP3 Data” on page 18.
*
2
Displayed only when AUX is ON.
*
3
TEL is displayed when the Alpine MobileHub is connected. Refer
to “Setting the Automatic Calling” on page 19.
3
Press BAND/TEL. to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press F/SETUP again.
The display returns to normal mode.
General Customizing
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1Press the MODE (Rotary encoder) repeatedly to select
the SUBW mode.
SUBW* → BALANCE → FADER → DEFEAT → VOLUME →
SUBW
*Displayed when Subwoofer is set to ON.
2Turn the Rotary encoder until the desired sound is
obtained.
Scroll Setting
SCR AUTO / SCR MANU (Initial setting)
This XM Radio can scroll the channel name, category, artist, and song
title. If connected with a CD text compatible CD changer or MP3
compatible CD changer, this unit can scroll the disc and track names
recorded on CD-TEXT discs, as well as the text information of MP3
files, folder names, and ID3 tags.
SCR AUTO : Channel name, category, artist and song title
(XM Radio), and CD text information, the text information of
folder and file names, and ID3 tags are scrolled automatically.
SCR MANU : The display is scrolled only when a disc is
loaded or when a track is changed, etc.
• The disc titles input manually (page 14) cannot be scrolled.
External Device
Turning Mute Mode On/Off
MUTE ON (Initial setting)/ MUTE OFF
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device.
Setting the AUX Mode (V-Link)
AUX ON / AUX OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-
410C) to this component.
You can change the AUX name display when AUX ON is set. Select
the AUX name by pressing g or f. Then press BAND/TEL.
If the KCA-410C is connected, it is possible to select two AUX
names.
•Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/POWER to select AUX
mode and then press BAND/TEL. to select your desired device.
f g
BAND/
TEL.
F/SETUP
MODE (Rotary encoder)
SOURCE/
POWER