Filter
Top Products
35-EN
01GB05IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is
connected to the IVA-D100, an Auxiliary Source will be allowed to
interrupt the current audio source. For example, you can listen to a
portable MP3 player through your car audio system even with a CD
changer connected and playing. The CD changer will automatically
mute when switched to the AUX Input. For further details on how to use
the Alpine KCA-801B, see your authorized Alpine dealer.
Setting item: IN INT. MUTE
Setting content: OFF / ON
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
With an Alpine navigation system connected to the IVA-D100, the voice
guidance of the navigation system will be mixed with the radio or CD
play.
Setting item: NAV. MIX
Setting content: OFF / ON
To adjust the navigation interruption volume level, the adjustment
for NAV. LEVEL can be performed in “Adjusting the Audio” on
page 25 after setting to ON.
• The audio volume during the navigation guide can be set by
adjusting the audio volume while the navigation guide continues.
When the navigation guide finishes, the previous audio volume and
the previous screen are restored. For exception, if the navigation cuts
in when the audio volume is lower than the setting level, the audio
volume during the navigation guide is reset the current listening
volume. (When the navigation guide cuts in, the audio volume does
not increase.)
• This setting is effective when NAV.IN of SYSTEM list screen is ON.
Setting item: AUX IN
Setting content: OFF / ON / CAMERA / VCR / GAME / TV /
EXT. DVD / EXTPLYR
• If "CAMERA" is selected, CAMERA mode name is displayed on the
VISUAL selection screen. When the rear camera is selected even if
the shift lever is not set to reverse (R), the rear picture is output by
selecting CAMERA.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM set up, although the AUX name can be
changed, it is not displayed on the source selection screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected name is displayed on the VISUAL and REAR selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
However “EXTPLYR” cannot be currently used, but will become
available when the system is expanded in the future.
• When the AUX name other than “CAMERA” is selected on the
Source Select screen, “CAMERA” cannot be selected. If an other
source (Radio, etc.) is selected on the Source Select screen,
“CAMERA” can be selected.
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
After setting to ON in "Setting the AUX Mode," this setting can be
carried out.
Setting item: AUX IN SIGNAL
Setting content: NTSC / PAL
• The video input type can be changed.
Setting the External Device Interrupt Mode
OFF: The volume level can be adjusted in Interrupt mode.
ON: Sound will not be output.
Setting the Navigation Mode
ON: Navigation source is displayed.
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
Setting the Navigation Interruption
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Adjusting the External Input Audio Level
LOW: Decreases the external input audio level
HIGH: Increases the external input audio level
Switching the Visual Input Signal
01GB00IVAD100.book Page 35 Tuesday, February 14, 2006 4:10 PM