Filter
Top Products
41-EN
01GB06IVA100.fm
ALPINE IVA-D100 68-05946Z49-A (EN)
Setting the Speakers
1
Check that Defeat mode is off (page 25).
2
Press SETUP.
The SETUP selection screen is displayed.
3
Touch [] of i-Personalize.
The i-Personalize screen appears.
4
Touch [] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [] of SPEAKER SELECT.
The SPEAKER SELECT screen appears.
6
Set the connected speaker by touching the
respective [] or [] button.
7
Touch [RTN] to return to the previous screen.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 44).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
Check that Defeat mode is off, and select the source
to be adjusted.
2
Press SETUP.
The SETUP selection screen appears.
3
Touch [] of i-Personalize.
The i-Personalize screen will appear.
4
Touch [] of A.PROCESSOR.
The A.PROC list screen appears.
5
Select ON or OFF of MX by touching [] or [] of
MEDIA XPANDER.
6
Touch [] after setting to ON.
The Media Xpander setup screen appears.
7
Touch [] or [] of the desired MX mode.
• Music source (such as radio broadcasts and CDs, excluding AM
radio) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3) / MX SAT (OFF, SAT MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX FM (OFF, FM MX 1 to 3)
The medium to high frequencies become more clear, and
produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE MX 1 to 2)
The dialog portion of the video is reproduced more clearly.
MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that
corresponds to the media connected.
8
Touch [RTN] to return to the previous screen.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for AM radio.
• MX CMPM is applied for MP3/WMA, MMD and iPod.
• MX SAT is applied for XM, SIRIUS, HD Radio.
• The MX setting can be performed only when a source is currently
selected.
X-OVER Adjustment
1
Check that Defeat mode is off.
2
Press SETUP.
The SETUP selection screen appears.
3
Touch [] of i-Personalize.
The i-Personalize screen will appear.
4
Touch [] of A.PROCESSOR.
The A.PROC list screen appears.
5
Touch [] or [] of X-OVER to select L/R or L+R.
6
Touch [] of X-OVER.
7
Touch [] of the speaker to be adjusted.
The screen changes to the X-OVER screen to be adjusted.
8
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [] or [] of FREQ., then select the cut-off
frequency (crossover point).
The adjustable bandwidth differs depending on the speaker
(channel).
FRONT1: OFF/FULL (Full Range)/TW (Tweeter)
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBW.: OFF/MONO/STEREO
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
(DVD MUSIC)
This disk contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
L/R: Different adjustment values can be set for the left and
right channels.
L+R: Sets the same adjustment values for the left and right
channels.
01GB00IVAD100.book Page 41 Tuesday, February 14, 2006 4:10 PM