Filter
Top Products
12 ENGLISH
~
]
Turn on the power.
Ÿ
and / or
All tracks will be played repeatedly until you change the source or detach the USB device.
If you have turned off the power (without
detaching the USB device)...
Pressing
/ SOURCE
turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stopping playback and detaching
the USB device
Straightly pull it out from the unit.
“No USB” appears. Press
/ SOURCE
to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc.
( 10, 11)
• You can listen to WAV files by following the
MP3/WMA file operations. ( 10, 11)
Cautions:
• Avoid using the USB device if it might hinder
your safety driving.
• While “Reading” is shown on the display:
– Do not pull out and attach the USB device
repeatedly.
– Do not pull out or attach another USB
device.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files
depending on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB
input terminal of the unit.
• Make sure all important data has been backed
up to avoid losing the data.
• Electrostatic shock at connecting a USB
device may cause abnormal playback of the
device. In this case, disconnect the USB device
then reset this unit and the USB device.
• Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
• Some USB devices may not work immediately
after you turn on the power.
• The detect time and response time may
be very long for some USB devices (such as
Digital Audio Player, etc.).
• For more details about USB operations,
33, 34.
USB input
terminal
USB memory
USB cable from the
rear of the unit
EN10-19_KD-R816_001A_2.indd 12EN10-19_KD-R816_001A_2.indd 12 12/15/09 9:22:54 AM12/15/09 9:22:54 AM