Alpine KD-A815 Car Stereo System User Manual


 
43ENGLISH
Symptom Remedy/Cause
MP3/WMA playback
Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
Noise is generated. Skip to another track or change the disc. (Do not add
the extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
A longer readout time is
required (“Reading” keeps
flashing on the display).
Do not use too many hierarchical levels and folders.
Tracks do not play back in the
order you have intended them
to play.
The playback order is determined by the file name.
Folder with numbers on the initial as their names
are sorted in numerical order. However, folder with
no numbers on the initial of their names are sorted
according to the file system of the CD.
The elapsed playing time is not
correct.
This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc (eg. variable
bit rate).
“Please Eject” appears on the
display.
Insert a disc that contains MP3/WMA tracks.
The unit beeps when a folder
is selected.
Selected folder is an empty folder*. Select another
folder that contains MP3/WMA tracks.
“Not Support” appears on the
display and track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
The correct characters are not
displayed (e.g. album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols.
(
9)
* Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
EN40-49_KD-A815[J]2.indd 43EN40-49_KD-A815[J]2.indd 43 12/14/09 12:55:12 PM12/14/09 12:55:12 PM