Filter
Top Products
128-6566
11 of 20
1111
1111
11
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS
cucu
cucu
cu TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the
first 10 seconds of each track on the disc
(SCAN will appear on the display panel). When
a desired track is reached, press the SCN
button again to cancel the function (SCAN will
disappear from the display panel) and play of
the selected track will continue. Scan mode
will also be canceled by activating the Repeat
Play, Random Play, or track select functions.
dl dl
dl dl
dl REPEAT PLAY SELECTOR
During disc play, press this button to repeat
the play of the selected track (RPT will appear
on the display panel). Play of the track will
continue to repeat until the button is pressed
again and the RPT indication disappears from
the display panel. Repeat Play mode will also
be canceled by activating the Track Scan or
Random Play select functions.
dmdm
dmdm
dm RANDOM PLAY SELECTOR (RND)
During disc play, press this button to play the
tracks on the disc in a random shuffled order
(RND will appear on the display panel). In
Random Play mode, the Track Select function
will also select tracks in the random order
instead of the normal progression.The
Random Play mode can be canceled by
pressing the button again (RND indication will
disappear from the display panel), or by
activating the Track Scan or Random Play
select functions.
dndn
dndn
dn DISC EJECT
During CD player operation, disc play is
stopped and the disc is ejected when the CD
OPEN/CLOSE/EJ ( ) button on the front of
the chassis is pressed to fold down the panel
to the 45
° position, and then pressed and held
for at least 2 seconds. Radio or another mode
will automatically resume depending on which
mode was in operation prior to disc play. If the
disc is not removed from the unit within
approximately 15 seconds of being ejected, it
will automatically be re-loaded into the unit to
prevent it from being accidentally damaged;
(
will appear on the display panel to
indicate that a disc is still loaded in the player).
Play of the disc can be resumed by using the
MODE button to choose the CD player function.
dodo
dodo
do TIME/FREQUENCY SELECTOR (T/F)
The radio is capable of displaying the time-of-
day or the current operating mode, such as
frequency. During radio operation,
momentarily press this button to call the time
display on the quartz clock. The time display
colon will be flashing. To return to the current
operational mode, press the T/F button again.
During integral CD player or cassette player
operation, or during CD changer or auxiliary
input operation, a press of the button will call
the time display, but tape or disc play will
continue uninterrupted. The time display will
remain until the T/F button is pressed again.
dpdp
dpdp
dp RESET BUTTON
A Reset button is accessible in the lower left
corner of the front panel and can be used to
activate the reset circuitry. However, this
feature should only be activated under the
following circumstances as it will erase the
time and pre-set memories:
1. Upon initial installation after all wiring
is completed.
2. If there is a malfunction of any of the
switches on the unit, pressing the Reset
button may clear the system and permit
a return to normal operation.
dq dq
dq dq
dq INFRARED SENSOR
Detects infrared command signal from the re-
mote control unit.