Filter
Top Products
128-6566
8 of 20
88
88
8
OPEROPER
OPEROPER
OPER
AA
AA
A
TT
TT
T
ING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUC
TT
TT
T
IONSIONS
IONSIONS
IONS
LOC icon to disappear from the display panel,
and the radio will stop at a wider range of
signals, including weaker (more distant)
stations.
bpbp
bpbp
bp
MONO/STEREO SELECTION (M/S)
During FM radio operation, this button is used
to select mono or stereo reception of the broad-
cast signal. Under normal reception condi-
tions, the unit should be left in the stereo mode
as indicated by the
ST indication on the
display panel when tuned to an FM stereo sig-
nal. If the stereo signal is too noisy for com-
fortable listening, press the M/S button to
switch to monaural reception; the
ST indi-
cation will disappear from the display. To re-
turn to stereo reception mode, press the but-
ton again so that the
ST indication reap-
pears on the display.
bqbq
bqbq
bq PRE-SET SCAN (PS) / AUTO-STORE
TUNING (AS)
Press this button momentarily to scan the
stations pre-set into the current AM band or FM
band. The unit will stop at each pre-set station
for 10 seconds before continuing to the next
pre-set station (the pre-set station number on
the display panel will flash during Pre-Set Scan
operation). Press the button again momentarily
to stop Pre-Set Scan operation and remain on
the selected frequency.
Pressing and holding the button for longer than
2 seconds will activate the Auto-Store (AS)
Tuning feature which will automatically scan
and enter up to 6 area stations into the pre-set
memories on the band in use. If the radio is in
the local mode (LOC displayed) the radio will
scan and enter only the stronger, more local
stations. If you have already set the pre-set
memories to your favorite stations, activating
the Auto-Store Tuning feature will erase those
stations and enter the new ones. This feature
is most useful when traveling in a new area
where you are not familiar with the local
stations.
br br
br br
br STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set using
the MANU/SKIP or Auto-Store (AS)
Controls.
3. Press the pre-set button to be set and
continue to hold it in for approximately 2
seconds. The preset number (CH 1-6)
will appear on the display panel,
indicating that the station is now set into
that pre-set memoryposition.The
station can now be recalled at any time
by pressing that button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band and
for the other 4 bands on the unit.
bs bs
bs bs
bs AUDIO MUTE (MUTE)
This button is used to mute the volume from
the system. By pressing the button, a flashing
volume indication will appear on the display
panel and the volume will be muted. Press-
ing the MUTE button again, or activating the
Volume Control
2, LOUD button 8, or Equal-
izer (EQ) button
9 will return the volume level
to the setting in use before the Mute function
was activated.
btbt
btbt
bt LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel
displays the frequency, time, and activated
functions.