Filter
Top Products
128-6838
13 of 16
-13-
el TRACK REPEAT PLAY SELECTOR (RPT)
When the RPT button is momentarily pressed, the RPT indication will replace the CDC indication on the display panel and play of the current track
will be continually repeated until the Track Repeat mode is canceled by pressing the RPT button again or by activating the Track Select, Random
Play or Scan
functions.
When the RPT button is pressed and held for more than 2 seconds, the disc repeat mode is activated; DRT will appear on the display and the play
of the current disc will be continuously repeated. This mode is canceled in the same manner as before.
em SHUFFLE PLAY SELECTOR (SHF)
When the SHF button is momentarily pressed, the SHF indication will replace the CDC indication on the display panel and the tracks on the disc
will be played in a random, shuffled order. The Track Select buttons
ds will also select tracks in the shuffled order instead of the normal
progression. The Track Shuffle mode can be canceled by pressing the SHF button again or by activating the Track Select, Repeat Play
or Scan
functions.
When the SHF button is pressed and held for more than 2 seconds, the disc shuffle mode is activated; DSF will appear on the display and the play
of the discs in the magazine will be played in a random shuffled order. This mode is canceled in the same manner as before.
CD CHCD CH
CD CHCD CH
CD CH
AA
AA
A
NGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERR
OR CODESOR CODES
OR CODESOR CODES
OR CODES
If a problem should develop while operating the CD changer, the error code “Err” may appear on the display
panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the
microprocessor control of the changer. If the error code should appear, try ejecting and re-loading the magazine
into the changer. While the magazine is out of the changer, make sure the discs are clean, undamaged, and
loaded correctly (see Owner’s Manual of the CD changer). You may also try activating the RESET button dn
on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further
assistance.
du TRACK SCAN SELECTOR (SCN)
When the SCN button is momentarily pressed, the SCN indication will replace the CDC indication on the display panel, and the first 10 seconds
of each track on the disc will be played in order. When a desired track is reached, press the SCN button again and play of the selected track will
continue (SCN will disappear from the display panel and CDC will reappear). The Track Scan mode will also be canceled by activating any other
disc function (Track Select, Repeat or Random).
When the SCN button is pressed and held for more than 2 seconds, the disc scan mode is activated; DSN will appear on the display and the first
10 seconds of the first track on each disc will be played in disc order. This mode is canceled in the same manner as before.