Filter
Top Products
128-6838
6 of 16
-6-
bs PRESET EQUALIZER (P. EQ) BUTTON
The P. EQ
button applies preset sound effects to the unit’s audio output
signal. The P. EQ button, when pressed, will activate one of the following
operating modes ( CLASSICS, POP M, ROCK M, DSP OFF or FLAT). If
the Sound Equalizer function is active, as displayed on the panel, and
the bass and/or treble level is set, the preset Equalizer function reverts
to the FLAT setting. On the other hand, if the Sound Equalizer function
is activated, the bass/treble setting(s) are ignored. Conversely, when
the preset Equalizer function is not active (Digital Signal Processor
(DSP OFF)), the unit returns to the user set bass and treble levels.
bt STATION SCAN (S.SCAN) BUTTON
When this button is pressed during radio operation, each station in the
current band will be scanned in the upward direction; each displayed
station will flash for 5 seconds before moving on to the next station. If
the local mode is active, only the stronger, nearby stations in the current
band will be scanned. When the desired station appears, press the
S.SCAN button again to remain on that frequency.
bu LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time
and activated functions, including a rotating disc icon (
) with a disc
in indicator (
).
NOTE: It is a characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may take
longer to illuminate than under normal conditions. In addition,
the visibility of the numbers on the LCD may slightly
decrease. The LCD read-out will return to normal when the
temperature increases to a normal range.
cl DISC SLOT
With the label surface facing up, gently insert the disc into the slot until
the soft-loading mechanism engages and disc play begins. S--CDP
will appear momentarily; the
indication will become animated,
and
appears together with the track number and elapsed time.
CAUTION: This unit is designed for play of standard 5" (12cm)
Compact Discs
ONLY. Do not attempt to use 3" (8cm) CD-
Singles in this unit, either with or without an adaptor, as
damage to the player and/or disc can occur. Such dam-
age will not be covered by the Warranty on this product.
cm TRACK SELECT
These buttons are used to quickly select the beginning of a particular track.
With each momentary press of the Forward Track Select button
(
), the next higher track number will be selected as shown on the
display panel. Similarly, with each momentary press of the Backward
Track Select button (
), the next lower track number will be se-
lected.
cn CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the disc can be made by
the Cue and Review functions. Press and hold the Cue button
(
) to advance rapidly in the forward direction or the Review but-
ton (
) to advance rapidly in the backward direction. During either
function, the elapsed time within each track will automatically be shown
on the display panel.
co DISC PAUSE (PAU) SELECT
The Pause function is used to freeze disc play when the CD player is
in use. S--PAUSE will appear on the display. Press this button again to
resume disc play; the S--PAUSE indication will disappear.
cp REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play of the selected
track (S--RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the S--RPT
indication disappears from the display panel. Repeat Play mode will
also be cancelled by activating the Shuffle Play cq or Track Scan cr
functions.
cq SHUFFLE PLAY SELECTOR (SHF)
During disc play, press this button to play the tracks on the disc in a
random shuffled order (S--SHF) will appear on the display panel). In