Filter
Top Products
128-6838
4 of 16
-4-
4 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing the
SEL button
3 so the BAS indication appears on the display panel.
Within 5 seconds of choosing the Bass mode, rotate the Volume Level
control 2 CCW or CW to adjust the bass response as desired. The
level will be shown on the display panel from a minimum --10 to a
maximum of 10 (00 indicates flat response). The display will
automatically return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
NOTE: If the BAS or TRB functions are set while the
Equalizer function (P.EQ) is active, the Equalizer
function will automatically revert to the FLAT setting.
5 TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing the
SEL button 3 so the TRB indication appears on the display panel.
Within 5 seconds of choosing the Treble mode, roatate the Volume
Level control 2 CCW or CW to adjust the treble response as desired.
The level will be shown on the display panel from a minimum of --10 to
a maximum of 10 (00 indicates flat response). The display will
automatically return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance mode
by pressing the SEL button 3 so the BAL indication appears on the
display panel. Within 5 seconds of choosing the Balance mode, rotate
the Volume Level control
2 CCW to adjust the stereo balance to the
left channel speakers, or CW to adjust it to the right channel speakers.
The balance position will be shown on the display panel from BAL 10L
(full left) to BAL 10R (full right). When the volume level between the left
and right speakers is equal, BAL L=R will be shown on the display
panel. The display will automatically return to the normal indication 5
seconds after the last adjustment or when another function is activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader mode by
pressing the SEL button 3 so the FAD indication appears on the
display panel. Within 5 seconds of choosing the Fader mode, rotate
the Volume Level control
2 CW or CCW to adjust the front-rear speaker
balance as desired. The fader position will be shown on the display
panel from FAD 10R (full rear) to FAD 10F (full front). When the level
between the front and rear speakers is equal, FAD F=R will be shown
on the display panel. The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another function
is activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will boost the
bass and treble ranges to compensate for the characteristics of human
hearing. Press and hold the BAND/LOUD button to activate this feature
and the indication LOUD ON will appear on the display panel for 5
seconds. Press and hold the button again to deactivate the feature,
and LOUD OFF will appear on the display panel for 5 seconds.
9 AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume from the system
(MUTE will appear flashing on the display panel). Pressing this button
again, adjusting the Volume Level control
2, or pressing any other
button, will return to the volume level setting in use before the Mute
function was activated.
bl AM/FM BAND SELECTOR (BAND)
Each time the BAND/LOUD button is pressed, the radio band is
changed. The indications F1, F2, F3 or AM will appear in the display
panel according to your selection.