Filter
Top Products
AXIS C3003-E Network Speaker
System Options
Ports & Devices
LED Settings
The Status LED can be congured to be unlit during normal operation. To congure, go to Setup > System Options > Ports &
Devices > LED.
The available options for the Status Indicator LED are:
• Normal: The status LED shows steady green during normal operation. This is the default setting.
• Off: The status LED is off during normal operation. This can be useful in making the Axis product less noticeable.
Maintenance
The Axis product provides several maintenance functions. These are available under System Options > Maintenance.
Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current
settings.
Note
A restart clears all entries in the Server Report.
Click Restore to reset most settings to the factory default values. The following settings are not affected:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The
Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings on page 30.
For information about rmware upgrade, see Upgrade the Firmware on page 3
1.
Support
Support Overview
The page provides information on troubleshooting and contact information, should you require technical assistance.
See also Troubleshooting on page 31.
System Overview
Logs & Reports
The page generates logs and reports useful for system analysis and troubleshooting. If contacting Axis Support, please provide a
valid Server Report with your query.
System Log - Provides information about system events.
Access Log - Lists all failed attempts to access the product. The Access Log can also be congured to list all connections to the
product (see below).
29