Filter
Top Products
17 V-AMP3 User Manual
behringer.com
Online Registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!
Shipment
Your V-AMP 3 was carefully packed at the factory, and the packaging was
designed to protect the unit from rough handling. Nevertheless, we recommend
that you carefully examine the packaging and its contents for any signs of
physical damage that may have occurred during transit.
If the unit is damaged, please do NOT return it to BEHRINGER. ◊
Instead, notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be honored.
Always use the original packing carton to prevent damage during ◊
storage or transport.
Make sure that no children are left unsupervised with the unit or ◊
its packaging.
Please ensure proper disposal of all packing materials.◊
Specications
Audio Inputs
Instrument input
¼
" TS connector, unbalanced
Input impedence 1 Mohms
Max. input level +9 dBu
Aux in stereo
¼
" TRS stereo connector
Input impedence 15 kohms
Audio Outputs
Analog line outputs L/R
¼
" TS connector, balanced
Output impedance 2.2 kohms
Max. output level +20 dBu
Headphones connector
¼
" TRS stereo connector, unbalanced
Max. input level +15 dBu/100 ohms (+23 dBm)
MIDI
Type 5-pin DIN connector IN, OUT/THRU
Digital Signal Processing
Converter 24-bit delta-sigma, 64/128 x oversampling
Dynamics A/D 104 dB @ preamp Bypass
Dynamics D/A 92 dB
Sample rate 31.250 kHz
DSP 100 Mips
Delay time max. 1,933 msecs.
Latency (Line In to Line Out) approx. 5 msecs.
Display
Type 2-digit 7 segment LED display
Power Supply
Mains voltage USA/Canada 120 V~, 60 Hz
UK/Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
China/Korea 220 V~, 50/60 Hz
Japan 100 V~, 50/60 Hz
Power consumption 13 W
Mains connection external power supply unit
Dimensions/Weight
Dimensions (H x W x D) 3.1 x 10.5 x 7"
79 x 267 x 180 mm
Weight 1.6 lbs / 0.8 kg