Filter
Top Products
28
You will now be presented with the
following buttons:
Daylight colour profi l: For selecting
the colour settings used when viewing
the map in daylight
Night colour profi l: For selecting the
colour settings used when viewing
the map in the night
NB:
The daylight/night time settings can be
changed manually or set to automatic.
(Chap. “General settings”, “Basic
settings”)
International Road Names: Some
motorways have international names
or numbers in addition to their
national names. You can choose to
be shown national names or both the
national and international names.
Show Street Names And POI: For
displaying street names and POIs on
the map
Simply press the relevant button to
change any of these settings.
Changing route information
Press the Advanced Settings
button in the Settings menu.
The Advanced Settings menu
opens.
Press the Display Settings
button.
The Display Settings menu opens.
Press on 3D in map to activate (tick) or
deactivate (no tick) the 3D map view.
Press the Coordinate display format
button to change the format used for the
coordinates.
Press the buttons shown under Cockpit
screen layout to change the route
information.
The route information includes the
following settings:
–
–
–
–
➜
➜
➜
➜
➜
➜
Distance to destination: Remaining
distance to destination (top fi eld,
default)
Time to destination: Estimated
remaining journey time (centre fi eld,
default)
Arrival at destination: Estimated
arrival time (bottom fi eld, default)
Time to next manoeuvre:
Time to next action
Speed: Current vehicle speed
Speed Limit:
Current speed
Distance to next via point: Remaining
distance to next intermediate
destination
Time to next via point: Estimated
remaining journey time to next
intermediate destination
Arrival at next via point: Estimated
time of arrival at next intermediate
destination
NB:
Only calibrate the screen if really
necessary and take great care when
doing so as this can cause the points
on the touch screen to be moved in
such a way that they cannot be pressed
anymore, making it impossible to operate
the Lucca.
To calibrate the Lucca’s screen, press the
Screen Calibration button.
You will now be shown a crosshair against
a white background.
Follow the onscreen instructions on how
to calibrate the screen.
–
–
–
–
–
–
–
–
–
➜
➜
Map view during route guidance
Lucca3_3RU_long_GB.indd 28Lucca3_3RU_long_GB.indd 28 11.07.2007 16:51:10 Uhr11.07.2007 16:51:10 Uhr