Filter
Top Products
31
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Adjusting the volume of the
beep
For a number of functions you will hear
a beep if you press a key for longer than
2 seconds, e.g. if you want to store a
radio station on a station preset. You can
adjust the volume level of this beep.
➮ Press MENU 8.
➮ Press : repeatedly until
“BEEP” appears in the display.
➮ Press : to adjust the volume.
“0” means the beep volume is off,
“9” means the beep volume is ad-
justed to the maximum volume.
➮ Once you have adjusted the set-
tings, press MENU MENU 8 or
OK ;.
Radio operation
This car audio system has been
equipped with an RDS radio receiver.
Many FM radio stations now transmit
the RDS signal, which contains such
other information as the station name
and the program type (PTY) along with
the regular station programming.
As soon as the car radio receiver de-
tects the station name, it will appear in
the display. It is also possible to display
the program type. For more information,
refer to the section on “Program Type
(PTY)”.
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮ press CD•C @ repeatedly until
“RADIO” appears in the display.
Special RDS functions (AF, REG)
The special RDS functions for AF (Al-
ternate Frequency) and REG (REGion-
al) improve the performance of your car
radio.
● AF. If this RDS function is activated,
the car radio continuously searches
in the background for the frequency
with the best reception for the sta-
tion you have tuned into.
● REG. A number of radio stations
broadcast different regional pro-
gramming at different times of the
day. Use REG to prevent your car
radio from tuning into alternate fre-
quencies which might have differ-
ent programming.
VOLUME CONTROL RADIO OPERATION