Blaupunkt MODENA CD50 Car Stereo System User Manual


 
40
Stopping the MIX function
To stop the MIX function, press 5
MIX > repeatedly until “MIX OFF”
appears briefly in the display and
MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
To scan all of the tracks on all of
the CDs in ascending order, press
OK ; for longer than two sec-
onds.
“SCAN” will appear in the display.
Stopping the SCAN function
To stop the SCAN function, press
OK ; briefly.
The track currently scanned will contin-
ue playing.
Note:
It is possible to adjust the scan time. For
more information, read the section on
“Adjusting the scan time” in the chapter
on “Radio Operation”.
Interrupting playback (PAUSE)
Press 3 >.
“PAUSE” will appear in the display.
Stopping PAUSE
Press 3 > during the pause.
Playback will resume.
CLOCK
Displaying the clock briefly
In the radio mode
To display the time briefly, press
/ DIS 7 briefly.
In CD player and CD changer mode
To switch between the display of
the CD number, playing time and
the time, press
/ DIS 7 once or
repeatedly.
Altering the permanent display
To make the time or another dis-
play as described above perma-
nent, press and hold
/ DIS 7
until the desired information ap-
pears in the display.
Setting the time
To set the time, press MENU 8.
“MENU” will appear in the display.
Press : until “CLOCKSET” ap-
pears in the display.
Press :.
The time will appear in the display. The
minutes will flash and can be altered.
Press or : to alter the min-
utes.
Once you have altered the minutes,
press :. The hours will begin to
flash.
Press or : to alter the hours.
Once you have set the time, press
MENU 8 or OK ; twice.
CLOCKCD CHANGER OPERATION