Filter
Top Products
30
Volume control
The car audio system volume can be
adjusted to levels from 0 (off) to 66 (max-
imum).
➮ To increase the volume, turn the
volume control knob 2 to the
right.
➮ To decrease the volume, turn the
volume control knob 2 to the left.
Adjusting the power-on volume
It is possible to adjust the volume at
which the car audio system switches on.
➮ Press MENU 8.
➮ Press : repeatedly until “ON
VOLUME” appears in the display.
➮ Press : to adjust the vol-
ume.
If you adjust this setting to “0”, the car
audio system will switch on at the vol-
ume used before it was switched off.
Warning of serious injury
If the power-on volume is set to the
maximum level, it may be extremely
loud when the car audio system is
switched on.
If the power-on volume is set to 0 and
the car audio system was played at
maximum volume before it was
switched off, it may be extremely loud
when the car audio system is
switched back on. This could result
in serious injury to your ears!
➮ Once you have selected the de-
sired settings, press MENU 8 or
OK ;.
VOLUME CONTROL
Mute
You can reduce the volume of the car
audio system immediately (mute).
➮ Press 3 briefly.
“MUTE” will appear in the display.
Selecting the mute level
It is possible to select the mute level.
➮ Press MENU 8.
➮ Press : repeatedly until “MUTE
LEVEL” appears in the display.
➮ Press : to select the mute
level.
➮ Once you have made your selec-
tion, press MENU 8 or OK ;.
Mute during telephone
operation
If your car audio system has been
equipped with a mobile telephone, it will
automatically switch to mute when you
use the phone. This will not work un-
less the mobile phone is connected to
the car audio system as described in
the installation instructions.
If a traffic announcement is received
while the phone is in use and traffic in-
formation priority has been activated,
you will hear the traffic announcement.
For more information, refer to the sec-
tion on “Traffic information reception”.
The car audio system will be muted to
the mute level selected.