Filter
Top Products
44
EQUALIZER
Adjusting the spectrometer
The spectrometer in the display uses
symbols to temporarily indicate what
adjustments are made to the volume,
the tone and balance/fader and the
equalizer settings.
If no adjustments are being made to the
system, the spectrometer displays the
output level of the car radio.
You can select the type of spectrome-
ter you want displayed in the menu.
There are two different types available.
Selecting the spectrometer type
➮ Press MENU 8.
“MENU” will appear in the display.
➮ Press : repeatedly until “EQ
DISPLAY” appears in the display.
➮ Press or : to select either
“SPECTRUM 1”, “SPECTRUM 2”
or “EQ DISP OFF”.
➮ Once you have completed adjust-
ing the settings, press MENU 8 or
OK ;.
Assistance in setting your equaliser
Start to make your settings in the treble and end it with the bass range.
Frequency range
Bass
60 to 100 Hz
Treble
10000 to
17500 Hz
Sound
impression/problem
Bass reproduction
too weak
Lifeless reproduc-
tion.
Lack of transparen-
cy.
Instruments do not
sparkle.
What to do
Boost the bass
with “LOW EQ”.
Frequency: 60 to
100 Hz.
Gain: +4 to +6 dB.
Boost treble
range with
“HIGH EQ”.
Frequency: 10000
to 17500 Hz.
Gain: +2 to +4 dB.
Notes
Avoid distortion.
Adjust the gain
carefully.
Avoid a piercing
type of tone.
Strong hissing
sound unpleas-
ant.