Filter
Top Products
DVD Operations
-9E 1
5
FUNCTION MENU
Tap button access into the Function
Menu, and there are have below options for
selection:
Repeat “CH”
the chapter.
to repeat playback the
current
During playback to change the audio
language (DVD/Divxonly).
Top button access into the
Video Setting mode, the below Setup menu
will appear:
Repeat “Title” the
current title.
to repeat playback
Repeat “ Off ” to cancel all the Repeat
function.
Repeat
Disc Audio
Video Setting
Change the Bright
level from 01 to 10.
Change the Contrast
level from 01 to 10.
Change the Color
level from 01 to 10.
Reset to default
setting
Close the Setting
menu
Under the DVD Setup mode, there are have
below optionsfor selection:
Setting the Default on will reset all options of
Media function setting to factory defaults
setting.
DVD Setup
Default
Aspect Ratio: Selecting the TV Aspect
setting allows the user to select the aspect
ratio of the TV (DVD and VCD only). The
following optionsare available:
TV Signal: The Video setting allows the
user to select the TV standard (DVD and
VCD only). The following options are
available:
4:3 = Aspect ratio of TV is 4:3.
16:9=Aspect ratio of TV is 16:9. Both wide
screen and 4:3 contents will fill the
entire screen.
NTSC=TVisNTSC.PALcontent isplayedat
NTSCresolution andframerate
(factory default).
PAL= TVisPAL.NTSCcontentis playedat
PALresolutionand ramerate.
AUTO=IfthecontentisPAL,the outputisPAL.
If thecontent isNTSC,theoutput is
NTSC.
6
INFORMATION
Tap button to viewthe Disc information
of theunit.
7
VIDEO SETUP
Tap button to quickly enter into the
video setupmode.