Boss Audio Systems BV9355B Car Video System User Manual


 
Dual Zone Operation
To Switch On Dual Zone Mode
The Available Playback Mode
To Operates Function of Front /
Rear Soures
This unit is equipped with the most advance
“Dual Zone” feature. This function is useful if
the user would like to select different modes of
the Audio and Video output source for Front
and Rear Speakers and TFT Screens. For
example, user can select to listen to Tuner
music for front speakers and rear speaker for
DVDmovie.
E - 1 2
1. “Off” isthe defaultsetting.
1. Front Zone: Tuner and BT modes are
available selectfor playbackon FrontZone.
2. Under SETUP menu, tap button
access into the Dual Zone mode, and then
tap select to2-Zone on.
1. The Front Panel & Remote control, is
defaulted to control the FRONT source's
function /operation.
2. When DUALZONE is turned“On”, theSource
button isused to changeFront source& Rear
source. Press the Source button repeatedly
tochange betweenFrontand Rear.
The default audio output reverts to what the
user selected for the FRONT Zone source
when DUAL ZONE IS “OFF”. For example:
When the DUAL Zone is “ON “, user has
selected DVD for Front ZONE & Tuner for Rear
ZONE. Once DUAL ZONE is turned “OFF”,
Audio Output for all 4 speakers becomes
“DVD”mode.
The Default Setting When Dual
Zone is “On”
To Switch Off Dual Zone Mode
The Default Setting When Dual
Zone Is In “off” Mode
3. The TFT screen will display the Rear Source
mode. User can to make the desired
operation on the Rear Source's function on
the FrontPanelor RemoteControl.
4. The will automatically switch
back to the Front Source after 10 seconds.
And the Front Panel buttons and Remote
now is resumed to operate for Front
Source's functionagain.
TFT screen
1. The default source / mode for Front ZONE is
Tuner& forRear ZONEis “DVD”.
2. The default Volume level is “12” for both
Front & Rear ZONE audio output. (or the
Volume Level set as VOL PGM Level set in
the Menu).
3. The TFT screen is defaulted to display the
FrontMode.
4. When Dual Zone is “On”, some of the
AUDIO FUNCTION, EQ FUNCTION and
SOURCE WILLNOT BEFUNCTIONAL.
NOTE
AV-1 & AV 2 are considered as the same
mode/source in the DUAL ZONE function.
So if either the Front or Rear Source is set
to AV-1 or AV-2 mode, The other ZONE is
not allowed to select the AV-2 or AV-1 Mode
eg: If F-Zone is selected “AV-1”, then
R-Zone is not allow to have ”AV-2”.
2. Rear Zone: Tuner , Media (Disc/USB/SD),
AV modes are available select for playback
Rear Zone.
Under SETUP menu, tap button
access into the Dual Zone mode, and tap
button select to 2-Zone off.