Filter
Top Products
E - 22
AV-In Mode
TIPS
The below “ No Video Signal ” will show on
the TFT as remind if there is no any
external AV System input.
AV -1
AV-2
This unit is allowed to connect with external
Audio/Video system such like Digital Camera
or Game Console. User can connect the
external A/V system thru the A/V injack on front
panel.
Connect the external signal to the RCA line in
jack located at the rearof theunit ,then press
button toselect AV-2.
In order to avoid any accident, the driver must
not watch video while driving. This unit is
designed to not allow watching video while
driving. Park your car in a safe place and
engage the parking brake before watching
video.
CAUTION
Tips
Be sure to connect Parking Brake connection
lead. ( please see more details on “ Wiring
Diagram.”)
Tips
Be sure to connect Reverse wire properly.
(please see more details on “ Wiring
Diagram.”)
If user connected a back up camera system
to this unit, the vehicle is in reverse Gear
(Back Up mode), the front in-dash TFT
display will automatically switch to Back Up
Camera Video signal regardless whatever
mode is currently displayed on the front in-
dash TFT.
NOTE
The Video Blocking system under Parking
Brake NOT ENGAGED only control this
unit's display, This system will not affect the
Video Output thru the rear RCA Video
Output.
NOTE
If watch moving video from Disc or AV In
source but Parking Brake is NOT
PROPERLY CONNECTED, the video signal
will be blocked by the system and the below
display will be show on TFT:
About The Reverse Wire For
Back Up Camera System
Select the AV Mode
About the Parking Wire
You can connect up to 2 optional devices, tap
buttonon displaytoenter intotheAVmode.
AV-1 =Frontpanel AVin
AV-2 =RCAback ofunit
Info