Filter
Top Products
Bluetooth Operations
E - 28
2. Once the phone number has been entered
completely, tap button to start dialing
the call, and the below display will show on
the TFT:
3. User can use the Encoder Volume Knob to
adjust thevolume level.
4. Tap button ondisplay toend
the conversation.The unit will switchback to
the previous mode automatically. The mute
of the previous mode will be released at the
same time.
5. During talking mode, if the Ignition is being
turned off, the unit will keep the
conversation even if the ignition is switched
off. After the conversation, User can tap
button toswitch offthe unit.
During the talking mode, user can tap the
button to transfer the audio from
the unit back to the Mobile Phone for privacy
reason. The below display will be show on TFT
for 3seconds:
To Audio Transfer From Head Unit Back
To The Mobile Phone
CALL TRANSFER
NOTE
After the tapped button,
the present mode will be muted at
the same time, user can press the
button to release the Mute.
Depending on different typeof Mobile
Phone, the time need for activating
the CALL TRANSFER mode is
different. Example Nokia Mobile
Phone usuallytakes 3-5 secondsafter
tapping button for audio
transfer back or forth from Unit to
Mobile Phone.
When making an outgoing call, it's
not possible to CALL TRANSFER if
the call is not being answered yet.
It's only possible to Transfer the call
to Mobile Phone after the call is
being answered.
Auto Answer Mode
User canset thisunit toautomatically answer all
the incoming calls, once this function is set to
on, userdo notneed totap the
button toanswer /acceptany incomingcall.
NOTE
Please refer to the SETUP MENU Operation
for more details of how to access into and
operates theSETUP MENUof BLUETOOTH
_Auto Answer.
AUTO ANSWER