Filter
Top Products
E - 25
Bluetooth Operations
Handsfree Operation
When connecting Bluetooth devices at the first
time with this unit, a mutual registration is
required, this is called “Pairing”. This
registration (Pairing) is required only at the first
time, as this unit and the other devices will
recognize each other automatically from the
next time.
After the devices are registered (Paired) with
this unit. User can select the registered device
and connectit, thisis called“Connecting”.
TIPS
This unit can Pair up to 8 devices with
Handsfree and / or Audio Devices.
If the pairing Bluetooth device has both
HFP (Handsfree Profile) and A2DP
(Advance Audio Distribution Profile).
This unit will automatically pairing these
two profiles at the same time.
Pairing, Connecting And Deleting
With A Bluetooth Device
Searching available Bluetooth
Devices for Pairing “from this unit”.
1. Access into the SETUP MENU,and touch
to activatethe Pairing procedure.
2. Tap to activatethe searching
pairing devicemode.
NOTE
Please see SETUP MENU Operation for
more details of how to access into
Bluetooth Menu – Pairing mode.
NOTE
Please make sure to check the pairing
Bluetooth device, make sure the
Bluetooth mode is turned ON and the
“VISIBILITY” is set to “SHOW”.
Storedimagemaydifferfromthe original
aspect ratio due to compression or
elongation.
3. When searching is completed, the detected
device name(s)will bedisplayed ina list.
4. Tap the device name you want to be
connected/paired with the selected device
in thelist.
5. Passwordinput: usercan inputminimum 1&
up to maximum 4 of any numeric number
between 0to 9, asthe passwordfor thisunit.
6. Tap button on display to confirm
the password input,and the Pairingprocess
should start.
7. “BT70” should appear on thepairing device,
user should select & accept pair with
“BT70” and then input the same password
which was input on this unit previously
on abovestep 6.
8. Ifthe pairing is successful,the below display
will beshow onTFT:
If the pairing failed, the below display will be
show onTFT for 3seconds:
and theunit will automatically switchback to
the previousmode.
NOTE
Please refer to the instruction manual of the
Bluetooth device on how to enter into the
Bluetooth set up and Bluetooth pairing.
NOTE
During Pairing, only the Volume & Mute
buttons are functional, all the other
function keys are disabled & non-operational
during the pairing mode.