Filter
Top Products
01
11
Before You Start
38
AM Tuner Section
VCD/CD Player Section
530-1710 (KHz)
(U.S.A.)
VCD Signal System
AUTO/PAL/NTSC
General
FM Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
50dB
30dB 1KHz
40 -12KHzHz
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without notice.
Specifications
Power Requirement
14.4V DC
(11-16V allowable)
Load Impedance
7dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.197x178 x 50
mm
(d/w/h)
Dimensions
Approx.2.7kgWeight
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
450KHz
IF Range
32dBuVUsable Sensitivity
(-20dB)
60dB
Signal-to-noise Ratio
55dB(1KHz)Separation
0.3%
Distortion
Max.Power Output
85W x 4
522-1620(KHz)
(Europe)
Frequency Range
(Optional)
(Optional)
DISC Player Section
DISC Signal System
AUTO/PAL/NTSC
60dB
Signal-to-noise Ratio
60dBSeparation
2
Channels
40Hz to 16KHz
Frequency Response
07
Tuner
During radio status, you can press ST
button on the remote control MO-
NO mode or STEREO
to select
mode.
MO/ST Selector
Stereo reception is on when Stereo
appears.
It is switched to MONO mode ono
appears.
when M
It is only valid on remote control.
It is only valid in FM.
6
Switch to MONO compulsively to improve
the listening quality when week signal.
Note:
*
*
*
AMS
During radio status, briefly press AMS
button on the remote control to scan each
stored seconds respectively which
are Number Buttons (from 1
to . When you can press responding
Number Buttons or ton when your
desired station is
station 6
stored in
6) the cor
AMS but
on, it will stop on that
station.
23
4
When you press and hold AMS for
more than 2 seconds,
memory storing The
radio automatically selects and
has it stored in any one of Number
Buttons (from1 to 6).
button
it will
function.
a station
the
automatically
activate the
Note:
* The unit can store up to 6 stations
each band.
* Pressing in the monitor also performs
the same function.
for
4
23
Number Buttons
During radio status, Number Buttons
(from 1 to 6) can help you yo-
ur favorite station. You can follow the
as below:
store
steps
23
During radio status, press Number Buttons
to receive the stored stations.
When turned to a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
Press and hold another number button
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
1
2
Pressing in the monitor performs the same
function.
Note:
*
5
Goto FREQ
2
Press GOTO, and the monitor
to input the valid
frequency as 100.00,. The program will then
be played.
shows FREQ.
Then press the number
Note:
*
It is only valid on remote control.
*
It is only valid when GOTO FREQ is ON in
main menu.
7
On Screen Display
8
During radio status, briefly press OSD
to display the edition information. The preset
frequency displays as the default setting.
1440 X 234 plxels
Resolution
600 NITS
Brightness