24 VRX835
English
Owner’s manual
VISUAL Operations
This function is available when a VTR, etc. is
connected to the visual 1 or visual 2 terminal.
∗ The visual 1 mode is not available when a DVD
changer is connected to the visual 1.
● “BRIGHT”:
Adjust the brightness of the display.
● “HUE”:
Adjust the tone of color (red is emphasized
or green is emphasized)
● “COLOR”:
Adjust the color saturation.
3. Operate the touch key to adjust a level.
● “BRIGHT”:
[–] key or [+] key
● “HUE”:
[R] key or [G] key
● “COLOR”:
[–] key or [+] key
4. When adjustment is made, touch the [RTN]
key to return to the ADJ MENU display.
Touch the [RTN] key again to return to the
STANDARD display.
∗ To return from the adjust a level display to the
STANDARD display, press the [ADJ] button
once again.
Changing over monitor display size
∗ This function is available only when the panel is
open.
Notes:
• This function is not available while you are driv-
ing.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [DISP] button to change over the
monitor display size. Each time you press
the [DISP] button, the monitor display size
changes in the following order:
“NORMAL” ➜ “WIDE” ➜ “F. WIDE” ➜
“CINEMA” ➜ “NORMAL”
● “NORMAL”: (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV
broadcasting (4:3), the image can be shown
without being cut or deformed.
● “WIDE”: (wide mode)
The image at right and left ends in a display
elongates horizontally.
● “F. WIDE”: (full wide mode)
The whole image elongates horizontally.
● “CINEMA”: (cinema mode)
The image at both top and bottom in a dis-
play disappears.
WARNING
For your safety, the driver should not watch
the VTR, etc. or operate the controls while
driving. Please note that watching and op-
erating the VTR, etc. while driving are pro-
hibited by law in some countries.
Switching to the VISUAL mode
Note:
• For your safety, the VRX835 has a safety function
which turns off the picture when the car is mov-
ing, so only the audio can be heard. The picture
can only be watched when the car is stopped and
the parking break is applied.
1. Press the [FUNC] buton and select the VI-
SUAL mode.
2. Press the [BAND] button to select the VI-
SUAL1 or VISUAL2.
Switching the VTR system between
NTSC and PAL
∗ This function is enabled only when the panel is
open.
Switch to the VTR/DVD video/DVD changer
mode you use.
1. Press the [ADJ] button to switch to the ad-
justment selection display.
2. Touch the [z] key to select “VTR N/P”.
Touch the [VTR N/P] key, [NTSC] key and
[PAL] key appears in the display.
3. Touch the [NTSC] key or [PAL] key to select
“NTSC” or “PAL”.
Adjusting the brightness and tone of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
• Switch to the VTR/TV/DVD video/DVD changer
mode you see.
1. Press the [ADJ] button to switch to the ad-
justment selection display.
2. Touch the [MONI ADJ] key to display
[BRIGHT], [HUE] and [COLOR] key. Touch
the [BRIGHT], [HUE] and [COLOR] key to
adjust BRIGHT, HUE and COLOR.