Filter
Top Products
36 VRX835
English
Owner’s manual
Entering titles
You can give a title to the user memory of the
G.EQ, DSF, VSE and P.EQ that you have ad-
justed yourself.
1. Press the [A-M] button to select the adjust-
ment mode in which you want to give a title.
2. Touch the [USER] key to select the “USER”.
3. Touch the [USER TITLE] key to select the
user memory to which you want to give a
title.
4. Touch the [TITLE] key in the USER TITLE
display, the display switches to the title input
mode display.
5. Touch the characters, symbols, etc. shown in
the display to enter titles.
“←, →” : Centering
“BS” : Backspace
“ ” : Space
“MEMO” : Memory
“z(w)” : Scroll
Note:
• Up to 8 characters can be input.
• To switch the character types, touch the scroll key
(
w
) at the lower left of the display.
6. Repeat the step 5 to input the title.
7. Touch the [MEMO] key for 2 seconds or
longer to store the title into memory.
8. Press the [A-M] button again. The unit re-
turns to the previous mode.
Standard mode/Setting the
listening position
Selection of listening position
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [z] key to select “POSI. SELECT”.
Touch the [POSI. SELECT] key to set the lis-
tening position type.
There are FULL SEAT, FRONT R (only right
seat), FRONT L (only left seat), FRONT (only
front seats), REAR (only rear seats) and
PASS available for the listening position types.
∗ The factory default setting is “FULL SEAT”.
Detail adjustment of listening
position
1. Press the [A-M] button to show the AUDIO-
MODE display.
DSP operations
● Woofer out adjustment
Select woofer output out of “STEREO”,
“MONO”, or “OFF”.
Touch the select a desire item key to set it.
● Woofer LPF adjustment
Select woofer LPF slope out of “50Hz”,
“80Hz”, “120Hz”.
Touch the select a desire item key to set it.
● HPF adjustment
Select HPF slope out of “50Hz”, “80Hz”,
“120Hz”, or “OFF”.
Touch the select a desire item key to set it.
● Test Tone Output
Select Test Tone Output
Touch the select a desire item key to produce
a test tone.
4. After adjustment (setting), touch the [RTN]
key to return to the adjustment selection dis-
play.
5. Press the [ADJ] button again or touch the
[RTN] key to return to the STANDARD display.
Selecting the Standard mode or the
professional mode
∗ The factory default setting is “STANDARD”.
1. Press the [ADJ] button to switch to the ad-
justment selection display.
2. Touch the [z] key two times to select “AC
PROCESSOR”.
Touch the [AC PROCESSOR] key to select
“PRO” and “STANDARD”.
3. Touch the [PRO] or [STANDARD] to select a
desired mode and to set the mode thus se-
lected.
4. After setting, press the [ADJ] button again to
return to the STANDARD display.
Woofer level adjustment
You can adjust an output sound level of
subwoofer.
1. Press the [A-M] button to show the AUDIO-
MODE display.
2. Touch the [WOOFER VOL] key to show the
woofer level adjusting display.
3. Touch the [w] or [z] key to adjust the level
(0 to 14)
4. After adjustment, touch the [RTN] key to re-
turn to the STANDARD display.