Filter
Top Products
34 VRX835
English
Owner’s manual
Adjusting the dimmer level
You can adjust the reduced illumination level of
the dimmer. When driving at night with the inside
of the car, the auto dimmer function can reduce
the display illumination linked “to the illumina-
tion power supply of the car” in this unit in or-
der to prevent glare from the display.
● The factory default:
When the car light is off: Brightest setting
When the car light is on: Medium brightness
1. When the panel is open, press the [ADJ] but-
ton to display the adjustment selection dis-
play.
2. Touch the [DIMMER LEVEL] key to adjust
the dimmer level.
3. Touch the [+] or [–] key to adjust.
4. Press the [ADJ] button again or touch the
[RTN] key two times.
The unit returns to the previous mode.
Setting the button illumination
∗ The factory default setting is “GREEN” (green).
1. When the panel is open, press the [ADJ] but-
ton to select the adjustment mode.
2. Touch the [KEY ILLUMI] key to select “RED”
(red) or “GREEN” (green).
3. Touch the [RED] or [GREEN] key to select a
desired mode and set it.
4. Press the [ADJ] button again or touch the
[RTN] key. The unit returns to the previous
mode.
Setting the beep
∗ The sound heard when you make operations is
called “beep”. The unit can be set up so that it
does not produce this beep sound.
∗ The factory default is “BEEP ON”.
1. When the panel is open, press the [ADJ] but-
ton to select the adjustment mode.
2. Touch the [z] key two times to select
“BEEP”.
Touch the [BEEP] key to select “ON” and
“OFF”.
3. Touch the [ON] or [OFF] key to select a de-
sired mode and set it.
4. Press the [ADJ] button again or touch the
[RTN] key, The unit returns to the previous
mode.
3. Touch the [TITLE INPUT] key in the MENU
display.
Touch the [INPUT] key in the USER TITLE
display, the display switches to the title input
mode display.
4. Touch the characters, symbols, etc. shown in
the display to input titles.
“←, →” : Centering
“BS” : Backspace
“ ” : Space
“MEMO” : Memory
“z(w)” : Scroll
Note:
• Up to 10 characters can be input.
• To switch the character types, touch the scroll key
(
z
) at the lower left of the display.
5. Repeat the step 4 to enter the complete title.
6. Touch the [MEMO] key for 2 seconds or
longer to store the title into memory and can-
cel title input mode.
Title list play
You can display a list of titles, then select the
disc or broadcast station to listen to from that
list.
∗ You can not display a title list with the unit in Seek,
Preset Scan, Auto store (Tuner, TV) mode. Cancel
those operation modes before to display a title list.
1. With the unit in radio, CD/MD changer, TV
mode, touch the [P. CH SELECT], [DISC SE-
LECT] key. A title list is displayed. The follow-
ing functions can be carried out in a title list
display.
●TUNER: A title of a station stored in the
presets 1 to 6 or frequency is displayed;
●CD/MD changer: DISC titles for discs 1 to
6 are displayed (By changing over a dis-
play page in case of 12-CD changer, disc 7
to 12 can be displayed). When there is not
any disc in a changer, ”NO DISC” is dis-
played.
●TV: A title of a channel stored in the presets
1 to 6 or a channel number is displayed.
2. Touch the [DIRECT] key (1 to 6) to select
one of the items 1 to 6 and reproduce the se-
lected broadcast station or disc.
∗ In case of 12-CD changer, touch the [DISC
SELECT] key to change over to a list display
of discs 7 to 12.
3. Touch the [RTN] key again to return to the
STANDARD display.
Other Functions