Filter
Top Products
VRX835 27
English
Owner’s manual
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the cur-
rently selected CD (MD) changer. This function
continues automatically until it is cancelled or
the mode is changed.
∗ The disc scan play is useful when you want to se-
lect a desired CD (MD).
1. Touch the [SUB MODE] key in the MENU
display to show SUB MODE.
Touch the [DISC SCAN] key to start disc
scan play.
2. Touch the [DISC SCAN] key again to cancel
disc scan play. Normal disc play continues on
the current track.
∗ The same operation is also available by using
the [SCN] button for 1 second or longer in the
panel.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Touch the [SUB MODE] key in the MENU
display to show SUB MODE.
Touch the [TRACK REPEAT] key, to make
repeat play starts. “TRACK REPEAT” lights
in the display.
2. To cancel repeat play, touch the [TRACK RE-
PEAT] key. “TRACK REPEAT” goes off from
the display and the unit returns to normal
play.
∗ The same operation is also available by using
the [RPT] button in the panel.
Disc repeat play
After all tracks in the current disc have been
played, the disc repeat play automatically re-
plays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1. Touch the [SUB MODE] key in the MENU
display to show SUB MODE.
Touch the [DISC REPEAT] key, disc repeat
play starts, “DISC REPEAT” light in the display.
2. To cancel disc repeat play, touch the [DISC
REPEAT] key again. “DISC REPEAT” goes
off from the display and the unit returns to
normal play from the track being played.
∗ The same operation is also available by using
the [RPT] button for 1 second or longer in the
panel.
CD/MD Changer Operations
Fast-forward/Fast-backward
●Fast-forward
Press and hold the right side (d) of the
[SEARCH] button for 1 second or longer.
∗ When the panel is open, the same operation
is also available by using the [d] button in the
panel.
●Fast-backward
Press and hold the left side (a) of the
[SEARCH] button for 1 second or longer.
∗ When the panel is open, the same operation
is also available by using the [a] button in the
panel.
Top function (CD)
The top function plays from the first track (track
No. 1) of the disc.
●When playing a disc 1 to 6
Press the [DIRECT] button (1 to 6) with the
same number as the CD playing.
●When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
Press the [DIRECT] button (1 to 6) with the same
number as the CD playing for 1 second or longer.
Top function (MD)
The top function plays from the first track (track
No. 1) of the disc.
Press the [DIRECT] button (1 to 6) with the
same number that the MD playing.
∗ If an MD is not loaded in a slot of the MD
changer, pressing the [DIRECT] button corre-
sponding to its disc number is invalid.
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is can-
celled or the mode is changed.
∗ The scan play is useful when you want to select a
desired track.
1. Touch the [SUB MODE] key in the MENU
display to show SUB MODE.
Touch the [TRACK SCAN] key to start scan
play.
2. Touch the [TRACK SCAN] key again to can-
cel the scan play. Current track continues to
play.
∗ The same operation is also available by using
the [SCN] button in the panel.