Filter
Top Products
Introduction
This
Dayton RS722
speaker kit uses two of the most popular Dayton Reference Series products; the
RS28AS-4
1-
1/8" Aluminum Dome Tweeter and 2 of the
RS180S-8
7" Woofers. The speaker is designed using a classic MTM
(Midrange Tweeter Midrange) configuration which is ideal for Home Theater or any home audio application. Once
your RS722 speaker kit is built and put into use it will have a soundstage and performance level that rivals much
higher priced off the shelf speakers. Your Dayton speaker kit is an excellent way to learn the basics of speaker
building and will provide you with the satisfaction of knowing you "built it yourself".
Parts Inventory
Before beginning the assembly process, please inspect and confirm that you have all necessary components.
If you appear to be missing any components, please contact your place of purchase immediately.
Part # Qty Description
MTM(C)-1.0 1 1.0 cu. ft. MTM cabinet
BAFFLE 1 Custom baffle (attached to cabinet)
XOVERS 1 Crossover Boards (tweeter and woofer)
MANUAL 1 Instruction Manual
WIRE14RB6 1 14 Awg Red/black Zip Cord 6 Ft.
BPA-38NI 1 HD Binding Post Pair Nickel
PTUBEADJ 1 2-1/2" Adjustable port tube
FOAM 1 1-1/2" x 24" x 18" Acoustic foam
PANS634 16 #6 X 3/4" Deep Thread Pan Head Screws
RS28AS-4 1 Dayton Reference 1-1/8" Shielded Aluminum Dome Tweeter
RS180S-8 2 Dayton Reference 7" Shielded Woofer
JANTZ.025-18 1 Jantzen .025 mH 18 ga
JANTZ.33-18 1 Jantzen .33 mH 18 ga
JANTZ.33-15 1 Jantzen .33 mH 15 ga
JANTZ.70-18 1 Jantzen .70 mH 18 ga
JANTZ1.2-16 1 Jantzen 1.2 mH 16 ga
DMPC-2.2 1 Dayton 2.2 uF cap
DMPC-12 2 Dayton 12 uF cap
DMPC-15 1 Dayton 15 uF cap
DMPC-20 1 Dayton 20 uF cap
DNR-2.0 1 Dayton 2 ohm resistor
DNR-7.0 1 Dayton 7 ohm resistor
TIES 5 Cable ties
CAULK 3 36" Speaker Sealing Caulk